R&M Materials Handling MANUAL CHAIN HOISTS - Manual (Page 68)

RPT / RPTC INSTRUCTION MANUAL/EN/06.17.09
6/10
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret
that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2009) R&M Materials Handling, Inc. All rights reserved.
3 RPT PUSH TROLLEY & RPTC HAND-GEARED TROLLEY
3.1 Description of the RPT Push Trolley and the RPTC Hand-geared
Trolley
The cross shaft of the RPT push trolley and the RPTC hand-geared trolley is suited for the top hook of
manual chain hoists or manual lever pullers. In addition, the LM1 , LM5 or LM10 electric chain hoists can be
adapted to the RPT push trolley, either with a top hook or a lug. The top hook, equipped with a safety latch,
simply hooks over the cross shaft. The shaft is specially shaped to keep the top hook or the lug centered in
place.
Most RPT and RPTC trolley models have two beam flange width ranges to cover a wide range of beam
flange widths. In these cases, the trolley has two cross shaft lengths, one for each range.
The trolley wheels are single flange and crown tread type suitable for Wide Flange beams or tapered flange
beams.
Wheel bearings are permanently lubricated and do not require greasing.
Trolleys have safety drop lugs and rubber bumpers are standard.
Capacity range of the RPT Push trolley models is ¼ ton [250 kg] to 5 ton [5000 kg].
Capacity range of the RPTC Hand-geared trolley models is 1 ton [1000 kg] to 10 ton [10,000 kg].
Table 4. RPT and RPTC Trolley Specifications
Models Beam Flange Width
Range
inch [mm]
Maximum
Capacity
lbs. [kg]
Min. radius Curve
ft [m]
Weight
lbs. [kg]
RPT-250 2 – 7.88 [50 – 200] 550 [250] 3.28 [1] 7.75 [3.5]
RPT-500 2 – 7.88 [50 – 200]
7.40 – 12.2 [188 – 310]
1100 [500] 3.28 [1] 7 [3]
9 [4]
RPT-1000
RPTC-1000
2.56 – 7.88 [65 – 200]
7.88 – 12.2 [200 – 310]
2200 [1000] 3.28 [1] 27 [12]
33 [15]
RPT-2000
RPTC-2000
3.46 – 7.88 [88 – 200]
7.40 – 12.2 [188 – 310]
4400 [2000] 4.92 [1.5] 35 [16]
42 [19]
RPT-3000
RPTC-3000
3.93 – 7.95 [100 – 202]
7.40 – 12.20 [188 – 310]
6600 [3000] 6.56 [2] 84 [38]
88 [40]
RPT-5000
RPTC-5000
4.5 – 7.95 [114 – 202]
7.40 – 12.20 [188 – 310]
11000 [5000] 6.56 [2] 130 [59]
134 [61]
RPTC-10000 4.88 – 7.87 [124 – 200]
7.40 – 12.20 [188 – 310]
22000 [10000] Straight
256 [116]
262 [119]
4 HANDLING & STORAGE
(Also see ‘Do’s and Don'ts’)
Do not allow the equipment to fall.
Do not stack these items of equipment on top of each other.
Handle the equipment by its structure or in its original packaging.