General properties, Further information – GE P&W Mobile Water Treatment Systems - MobileFlow Demineraliser User Manual
Page 2
Page 2
AP-FsmobMobileFlow_EN
also typically used during by-pass of the client’s
deaerator for inspections and repairs.
Softening
The MobileFlow system provides softening at high
flow rates, routinely producing water at 135
kL/hour, and can be reconfigured to produce 225
kL/hour per container. Mobile and quickly availa-
ble, this application can be provided with either
exchange service off-site regeneration) or on-site
regeneration. A MobileFlow unit has a softening
capacity in excess of 15 million grains.
Condensate Polishing
Utilising a cation/mixed bed configuration,
condensate can be polished to remove crud
loading and trace ionic contaminants during unit
start-ups or for longer-term requirements. The
10% cross-linked cation resin is strong enough to
withstand aggressive temperatures and crud
loads of the condensate while keeping the mixed
bed resins clean for final ionic contaminant
removal without interference.
General Properties
The MobileFlow system incorporates an exclusive
piping system linking six rubber-lined ASME code
pressure vessels. The international version is
housed in a Standard 40’ ISO shipping container
(EMEA trailer version shown).
Dimensions and weights
Container length 12.2 m
Container height 2.9 m
Container width 2.6 m
Container weight 25,400 kg shipping weight
39,000 kg operating weight
Electrical
Electrical power
requirements
240V, 15A
Specifications
Inlet/outlet
connections
4” ANSI 150# flange
Resin capacity
Over 5 million grains (Demineralization)
Outlet resin trap 8” with suitable mesh element
Suitable media
Ion exchange resins, synthetic adsor-
bents, activated carbon, granular filter
media, etc.
Instrumentation
Two conductivity meters, one with
strip chart recorder and alarm or
telog recorder, with alarm
High/Low temperature alarms
Complete pressure instrumentation
Rate of flow indicator
Totalizing flow meter
Controls
Adjustable pressure reducing valve
on inlet
Isolation valves on all pressure
vessels
Automatic shutdown system
External audible alarms
Further Information
For more about the Emergency and other services
please call number below:
Australia toll free 1800 064 140 or
visit www.ge.com/water
MobileFlow Pressure Drop
at 16°C
INFLUENT WATER TDS – mg/l as ions
Demineraliser Capacity