GE P&W Mobile Water Treatment Systems - MobileFlow Demineraliser - Manual

Fact Sheet
Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2011, General Electric Company. All rights reserved.
AP-FSmobMobileFlow_EN Sep-11
MobileFlow* Demineraliser
Description and Use
GE offers the world’s largest fleet of mobile water
treatment systems, providing demineralisation,
filtration, softening, and deoxygenation treatment,
quickly and efficiently – available for either emer-
gency, supplemental, or extended term service.
All aspects of treatment, from system analysis and
design through installation, maintenance, up-
grades and emergency response are available.
Included are immediate system backup, complete
analytical laboratory, application and engineering
consultants, qualified Field Service Representa-
tives (FSR’s), regional service centers, and a 24-
hour dispatch and control center.
The MobileFlow is housed in a standard 40’ ISO
shipping container. The system can be operated
by FSR’s, your plant personnel or remotely moni-
tored. Automatic shutdown features protect from
power failure, excess pressure and off-
specification water. Regional service centers per-
form regeneration quality control checks on every
unit. Demineralisation treatment is available in as
little as two hours plus transit time. Other special
applications may require additional time.
Typical Applications
Demineralisation
Premium 10% cross-linked cation resins and po-
rous Type I strong base anion resins are standard
in custom loading of the MobileFlow system.
Regeneration of ion exchange resins at service
centers provides the highest conversions for eco-
nomical production of ultra pure water. A proprie-
tary rinse is used on the selected resins to prevent
any residual QC test water from remaining in the
container when it is delivered to the user. Off-site
resin regeneration gives the customer the use of a
true zero discharge system.
Formalized resin purchase specifications include
specific test procedures and quality limits to en-
sure that the products are free of manufacturing
impurities, and can meet the most stringent speci-
fications.
Filtration
GE stands alone in filtration capability, having pio-
neered in-line coagulation for the mobile water
treatment industry. The MobileFlow system takes
advantage of a proprietary dual media filter that is
treated with a biocide, acid, and hot water after
each use to protect against cross-contamination
from various surface water sources.
We guarantee the effluent quality for influents up
to 50 NTU and the system can also treat water up
to 100 NTU. Treatment flow rates are dependent
upon the influent turbidity values. Typically, flow
rates up to 135 kL/hour per container are possible
with influent values of less than 10 NTU.
Deoxygenation
Our patented DEOX* process provides a water
quality of less than 1 ppb dissolved oxygen, with
0.5 ppb typically measured. Clients in the pulp and
paper, petrochemical, refinery, and utility
industries have benefited by our capability to
deoxygenate water from virtually any source,
including municipal, well, raw surface water,
condensate, and demineralized water. This service
is readily available on an emergency basis, and is