GE P&W Pleated Filters - Flotrex PN Pleated Filters User Manual
Flotrex* pn, Description and use, Typical applications

Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2010, General Electric Company. All rights reserved.
FS1082EN.doc Aug-10
Fact Sheet
Flotrex* PN
Pleated Filters with Polypropylene Microfiber Media
Figure 1: Flotrex PN Filters
Description and Use
The Flotrex PN (FPN) microfiber filters (Figure 1) offer
an economical solution for your filtration needs. The
all polypropylene construction of the FPN filters pro-
vides superior chemical compatibility. The gradient
density, thermally bonded polypropylene media has
excellent dirt holding capacities and reliable reten-
tion characteristics. FPN filters do not contain any
adhesives or additives.
Typical Applications
FPN filters are an economical alternative to
membrane filters in a broad range of applications,
Including:
• Filtration of liquid polymers, coatings, and inks
• Filtration of bulk chemicals
• Beer trap filtration
• Post Carbon bed and DI bed filtration
• Pre-filtration to protect expensive final filters
General Properties
Flotrex PN filters are available in the following
nominal pore size micron rating: 0.2 0.45, 1, 2, 3, 5,
10 and 30 µm. Tables 1, 2, 3 and 4 show further
details on materials of construction, dimensions,
operational limits and flow performance.
Table 1: Materials of Construction
Description
Material of Construction
Filtration Media
Polypropylene Microfiber
Support Layers
Polypropylene Microfiber
Core and Cage
Polypropylene
Endcaps and Adapters
Polypropylene
Table 2: Dimensions
Filter Model
Nominal O.D. Nominal I.D. Effective Filtration Area
FPN92
2.75” (70 mm) 1.25” (31mm)
4.8 ft
2
(0.45m
2
)
FPN94
2.75” (70 mm) 1.25” (31mm)
5.5 ft
2
(0.51m
2
)
FPN03, FPN05 2.75” (70 mm) 1.25” (31mm)
5.5 ft
2
(0.51m
2
)
FPN01, FPN02 2.75” (70 mm) 1.25” (31mm)
6.4 ft
2
(0.59m
2
)
FPN10, FPN30 2.75” (70 mm) 1.25” (31mm)
7.3 ft
2
(0.68m
2
)
Table 3: Operational Limits
Description
Operational Limits
Maximum Forward Differential Pressure
60 psi (4.1 bar) at 70ºF (21ºC)
Maximum Reverse Differential Pressure
30 psi (2.1 bar) at 70ºF (21ºC)
Maximum Operating Temperature
180ºF (82ºC) at 10 psid
(0.69 bar) in water