GE P&W PRO ANZ Series 50 Hz User Manual
Pro anz series 50 hz, Basic features, Materials of construction
![background image](/manuals/286517/1/background.png)
Find a contact near you by visiting www.gewater.com and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2013, General Electric Company. All rights reserved.
AP-FSpwPRO_ANZ_Series_50Hz_EN.doc Jul-13
Fact Sheet
PRO ANZ Series 50 Hz
Reverse Osmosis Machines from 11 to 102 m
3
/hr
Basic Features
1000 mg/L feed TDS and 20C water temperature
design
AS3000 compliant electrical panel
GE Fanuc Micro VersaMax PLC with 6-inch Quick
Panel touchscreen
4-20 mA instrument display on instrument center
Non return valve on inlet and 3-way valves or pres-
sure relief valves on outlets
Optional 2500 mg/L feed TDS and 16C water tem-
perature design.
Optional pH and ORP sensors
Optional skid mounted Wye-Delta motor starter
Materials of Construction
High-pressure piping........................................... 316 SS, Sch. 10
Low-pressure piping .................................................. PVC, Sch. 80
Frame ................................................... Painted blue carbon steel
Enclosure ..........................................IP54 (painted carbon steel)
Instrumentation
Flow Meters ............................................ Permeate, concentrate
Conductivity......................................................................... Permeate
Pressure ....................................... Pre-filter, post-filter, primary,
final, permeate, concentrate,
pump discharge
Pressure Switch ....................... Feed, permeate, concentrate
pH (Optional with Basic Electrical) ..................................... Feed
ORP (Optional with Basic Electrical) .................................. Feed
Instrument Center ....................................................... Signet 8900
Premium Features
1000 mg/L feed TDS and 20C water temperature de-
sign
AS3000 compliant electrical panel with Allen Bradley
CompactLogix PLC and PanelView 700 color
touchscreen
pH and ORP Sensors included
Skid mounted and wired variable speed drive
Non return valve on inlet and 3-way valves or pres-
sure relief valves on outlets
Automatic concentrate flow control valve
Optional 2500 mg/L feed TDS and 16C water tem-
perature design.
Documentation Included
Operation and maintenance manual
Drawings: piping and instrumentation, electrical and
general dimension
Operating Parameters
Design Recovery
1
......................................................................... 75%
Design temp.
2
................................................................................ 20ºC
Operating range ................................................................. 2 to 30ºC
Nominal rejection ................................................................. 97-99%
Design inlet pressure ........................................................... 2-4 bar
1
Recovery Rate can vary +/- 5%
2
Option available for 16ºC water temperature