GE P&W SeaPRO Series 50 Hz, 35,000 ppm NaCL 500-1500 m3_day (100-300 gpm) - Manual

Fact Sheet
Find a contact near you by visiting www.gewater.com and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2013, General Electric Company. All rights reserved.
FS1016EN.doc Jul-13
SeaPRO* Series 50 Hz
Seawater Desalination Machines
35,000 ppm NaCl, 500-1500 m
3 /day (100-300 gpm)
Basic Features (BAS)
 GE Fanuc Quick Panel 6-inch color display.
Primarily text operating screens, Touchscreen
controls.
 GE Fanuc Micro VersaMax processor
 4-20 mA instruments displayed on instrument
center
 Variable frequency drive (VFD) for high pres-
sure pump
 Motor starter for boost pump
 Stand alone master control enclosure, skid
mounted local control enclosure with terminal
strips
 Membrane/energy recovery device
(ERD)/boost pump and pump/prefilter located
on separate skids
Premium Features (PRE)
 GE Fanuc QuickPanel 12-inch color display.
Text and pictorial operating screens.
Touchscreen controls.
 GE Fanuc VersaMax processor
 4-20 mA instruments on touchscreen
 Primary and final pressure transmitters
 Variable frequency drive (VFD) for high pres-
sure pump
 Motor starter for boost pump
 Automated valves and control for feed flush
upon shut down
 Stand alone master control enclosure, local
control enclosure with remote I/O
 Membrane/energy recovery device
(ERD)/boost pump and pump/prefilter located
on separate skids