GE P&W TrueSense for Cooling Water Treatment User Manual
Page 2

Page 2
FS1214EN
of preconfigured modules including sensors, includ-
ing GE’s PaceSetter*, Aquatrac, Walchem equip-
ment.
(Aquatrac is a trademark of Aquatrac Instruments, Inc. Walchem is a
registered trademark of Walchem Corporation.)
After surveying the cooling system, GE Professionals
will configure a solution to meet the system com-
plexity, specific needs, goals, and budget of any
customer.
Many customers have made substantial invest-
ments in automation and control.. A goal is to fully
utilize pre-existing equipment whenever possible,
avoiding unnecessary expense.
Simplicity By Design
• Attention to user needs makes the sophisticated
TrueSense technology easy to install, operate,
and service
• Designed to perform to an industrial environ-
ment with a simple maintenance procedure
performed once per month
• Alarming features and self-contained diagnos-
tics make troubleshooting fast and effective
Installation
• GE professionals will always coordinate with
plant personnel, and be present for a smooth,
speedy installation.
• In most applications, a minor amount of cus-
tomer preparation and support is required.
• In more complex situations, or where the cus-
tomer chooses to outsource installation, GE pro-
fessionals will support or contract for the
installation services.
Ongoing Services
Skilled GE personnel perform simple and fast
monthly maintenance. Should a problem develop,
repairs are either conducted on site, or a replace-
ment unit can be provided.
Specifications (monitor)
Dimensions:
34” H x 12” W x 9” D
(85 cm x 30 cm x 22.5 cm)
Weight:
55 lbs (25 Kg)
Ambient
Temperature:
41º to 122ºF (5º to 50ºC)
Measurement
Frequency
Every 15 minutes to once/day
Outputs 4-20
mA
Enclosure Rating IP64/54
Required Utilities (monitor)
Power:
120 VAC, 50-60 Hz, 0.6A service
Sample Stream
Flow:
Differential pressure between
the monitor’s inlet and outlet of
10 psid (0.7 bar), with a maxi-
mum inlet operating pressure
of 50 psig (3.4 bar)
Electrical Safety
Certifications:
N. America: UL/CSA 61010-1
Europe: CE
Asia/Pacific Region: Current
approvals include China, India,
Korea, Japan, Taiwan, Malay-
sia, Vietnam, Singapore, Aus-
tralia and New Zealand.
STP
STP
Figure 2: Simple touchpad interface of the TrueSense
monitor enables quick and easy navigation through all
functionality.