GE P&W Pleated Filters - Memtrex PM Pleated Filters - Manual

Fact Sheet
Asia/Pacific
Shanghai, China
+86 (0) 411-8366-6489
©2006, General Electric Company. All rights reserved.
*Trademark of General Electric Company; may be registered in one or more countries.
FS1084EN 0702
Americas
Watertown, MA
+1-617-926-2500 Europe/Middle East/Africa
Heverlee, Belgium
+32-16-40-20-00 Find a contact near you by
visiting gewater.com or
e-mailing [email protected]. Global Headquarters
Trevose, PA
+1-215-355-3300
Memtrex* PM
Pleated Filters with Polypropylene Membrane
Figure 1: Memtrex PM (MPM) Pleated Filters
Description and Use
Memtrex PM (MPM) filters' 100% polypropylene con-
struction offers low extractables, long service life
and broad chemical compatibility (Figure 1). Ther-
moplastic sealing techniques are used in the car-
tridge construction eliminating the need for glues or
sealers which could leach contaminates. MPM filters
are integrity testable. All components are made of
FDA-acceptable materials and meet the test criteria
for the USP24 Class VI 121˚C plastics.
MPM filters utilize high flow polypropylene mem-
branes, capable of protecting your gas, air, and liq-
uid processes with absolute ratings of 0.1 and 0.2
micron. GE Water & Process Technologies is your
complete source for filters, crossflow membranes,
housings and other filtration equipment.
Typical Applications
Memtrex PM filters are specifically designed for
pure chemical filtration.
Typical applications include:
• Vent and Process Air
• Etchants, Photoresists and Developers
• Solvents, Acids and Bases
• Ultrapure Chemicals
General Properties
Memtrex PM filters are available the following abso-
lute pore size micron ratings: 0.1 and 0.2 µm.
Tables 1, 2, 3, 4, 5 and 6 show further details on ma-
terials of construction, dimensions, operational lim-
its, integrity testing and flow performance in air and
water.
Table 1: Materials of Construction
Table 2: Dimensions
Table 3: Operational Limits