GE P&W PRO NA Series 60 Hz - Manual

Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2013, General Electric Company. All rights reserved.
AM-FSpwPRO_NA_Series_60Hz_EN.doc May-13
Fact Sheet
Osmo* PRO NA Series
60 Hz Reverse Osmosis Machines from 50 to 450 gpm
Specific Basic Features (BAS)
 GE Fanuc QuickPanel 6.0-inch monochrome
display Touch screen controls
 GE Fanuc Versamax Micro Communication:
RS232
 4-20 mA instruments displayed on instrument
center
 UL/cUL Electrical Panel
Specific Premium Features (PRE)
 GE Fanuc Quickpanel, 12.0-inch color display
Text and pictorial operating screens, Touch
screen controls
 GE Fanuc Versamax, Communication: Ethernet
 4-20 mA instruments on QuickPanel
 Primary and final pressure transmitters
 RO permeate flush on shutdown
 UL / cUL Electrical Panel
 pH Meter on RO Feed
Instrumentation
Flow Meters ........................................ Permeate & Concentrate
Conductivity ........................................................................ Permeate
Pressure ...............................................Pre & Post Cartridge Filter
RO Feed , Pump Outlet, Interstage (x2)
Concentrate & Permeate
Pressure Switch ....................... Feed, Permeate, Concentrate
pH (Optional) .................................................................................. Feed
ORP (Optional) ............................................................................... Feed
Instrument Center (BAS) ............GF Signet 8900 Multimeter
Options Available
 Allen Bradley CompactLogix PLC Control Package
 Membrane Options:
-
400 Square Foot Elements
-
High Rejection Elements
 Motor Starter
 Variable Frequency Drive
 ORP Meter
 pH Meter (Option for basic)
PRO NA Accessories
 PRO Multi-Media filters
 PRO Activated Carbon and Softeners
 PRO Clean-in-Place units
 PRO Chemical Feed Systems
 Transfer Pumps and Storage Tanks
Operating Parameters
Design Recovery 1 ......................................................................... 80%
Design Temperature .................................................... 60ºF (16ºC)
Operating Temperature Range .................. 35-85ºF (2-29ºC)
Nominal rejection ................................................................. 97-99%
System Inlet Pressure ..................................................... 30-60 PSI
1 Recovery Rate can vary +/- 5%
Materials of Construction
High-pressure piping ................ 316 Stainless Steel, Sch. 10
Low-pressure piping ................................................. PVC, Sch. 80
Frame ....................................................Painted blue carbon steel
Enclosure ................................................................................... Nema 4
Clamps/fittings............................................................... Zinc-plated
Membrane Elements and Housings
Membrane Model .............................................................. AG8040F
Style ........................................................... Spiral-wound elements
Manufacturer ..................................................................................... GE
Membrane type .................................................... TFC (Polyamide)