beautypg.com

GE P&W Mobile Water Treatment Systems - Super 700 MobileRO User Manual

Super 700 mobilero, Reverse osmosis for high flow applications, Description and use

background image

Fact Sheet

Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.

* Trademark of General Electric Company; may be registered in one or more countries.

©2010, General Electric Company. All rights reserved.

FsmobSuper700_EN Jul-10

Super 700 MobileRO*

Reverse Osmosis for High Flow Applications

Description and Use

MobileRO reverse osmosis (RO) containers provide
emergency, interval, or long-term service to meet
the needs of industrial pure water users. The Super
700 MobileRO is configured to produce up to 700
gpm (159 m

3

/h) in single-pass mode and up to 300

gpm (68 m

3

/h) in two-pass mode. The unit contains

the necessary hardware to monitor the system op-
eration including, inlet and permeate conductivity,
inlet pH, inlet ORP meters; concentrate and perme-
ate flow meters; and pre-filter, post-filter, primary,
final, and interbank pressure transmitters.

The data is monitored to ensure the MobileRO op-
erates optimally. The MobileRO container also con-
tains the necessary chemical pumps essential for
maintaining the required water quality specifica-
tions.

Standard Features

• RO configurable process flow to meet various

water demands; two pass or two train operabil-
ity in a single system

• Up to 700 gpm (159 m

3

/h) in single-pass mode

or up to 300 gpm (68 m

3

/h) in two pass mode

• Rejection rates of 97% or more
• Removes not only dissolved ions, but also bac-

teria, pyrogens, organics, particles, colloids, col-
or and oxidizing agents at up to 99.9%

• Emergency, interval, and long-term service for

RO water need

• Three injection ports for chemical addition
• 1-micron cartridge filtration for superior protec-

tion of reverse osmosis elements

• Able to combine with other GE Mobile units to

enhance system capability

General Properties

Description

System on Board

Single Pass Product Flow

Up to 700 gpm (159 m

3

/hr)

Two Pass Product Flow

Up to 300 gpm (68 m

3

/hr)

Recovery

60 to 75%

Nominal rejection

95 to 99%

Operating range

45° to 85°F (7° to 30°C)

Minimum inlet pressure

30 PSIG (2 bar)

Maximum inlet pressure

60 PSIG (4 bar)

SDI

15

3

Description

Trailer

Length:

40’-0” (12.2 meters)

Height:

9’-6” (2.9 meters)

Width:

8’ (2.4 meters)

Shipping Weight:

50,000 lbs. (22,7i00 kg)

Operating Weight:

54,000 lbs. (24,500 kg)