Warning – Peerless-AV ADD1012 - Installation User Manual
Page 2
ISSUED: 01-28-00 SHEET #: 026-9006-2 07-23-04
Visit the Peerless Web Site at www.peerlessindustries.com
For customer service call 1-800-729-0307 or 708-865-8870.
2 of 2
SLOT
A
VIEW FROM BELOW
DETAIL 1
After tightening retaining collar onto end of
extension pipe (A), align one of the small holes in
the side of the retaining collar with slot in the end
of adjuster tube. Insert and tighten M5 x .8 x 10
mm phillips screw through side of retaining collar
into slot. This will lock the retaining collar to the
adjuster tube. Note: The part used in this step
are provided with the multi-display system.
Cross
Support
Cross
Support
Fiber
Washer
Retaining
Collar
M5 x .8 x 10 mm
Screw
Attach extension column to multi-display mount as shown using M5 x .8 x 10 mm screw, fiber washer and retaining
collar sold with multi display systems.
IMPORTANT: Lock retaining collar as shown in DETAIL 1 .
• For safety retaining collar must be locked to adjuster
tube!
WARNING
© 2004 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.