Peerless-AV RMI1 - Installation User Manual
Page 3
3 of 4
ISSUED: 06-16-08 SHEET #: 120-9049-1
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-865-2112 or 708-865-8870.
Installing Wall Mount Hook Bracket
Installing Ceiling Mount Tilt Bracket
Installing Stand Adapter Bracket
Installing SR Cart and SS Stand
Hook Plate
Attach tilt bracket to rotational mount (A) using
the M10 x 15 mm screws provided with tilt
bracket as shown below.
A
TILT
BRACKET
M10 X 15 mm screws
Attach adapter bracket to rotational mount (A) using the
M10 x 15 mm screws provided with adapter bracket as
shown below.
M10 x 15 mm screws
A
ADAPTER BRACKET
NOTE: The ACC170 (sold separately) accessory is
required.
Align inner holes of accessory plate to inner holes
of hook plate. Attach accessory plate to hook plate
using four M10 x 15 mm screws (B) with 6 mm
allen wrench (F) as shown below.
Attach interface plate to rotational mount (A) using the M10 x 15
mm screws provided with hook plate as shown below.
B
HOOK PLATE
ACCESSORY
PLATE
INTERFACE
PLATE
M10 x 15 mm screws
Attach hook bracket to rotational mount (A) using the
M10 x 15 mm screws provided with hook bracket as
shown below.
A
M10 X 15 mm screws
HOOK
BRACKET
A
NOTE: Reinstall hook bracket to wall mount according to wall mount
instructions.
NOTE: Reinstall tilt bracket to ceiling mount according to ceiling mount
instructions.
NOTE: Reinstall adapter bracket to LCD stand according to stand
instructions.
NOTE: Reinstall hook plate to cart or stand according to instructions
included with cart or stand
3-1
3-2
3-3
3-4