Peerless-AV VPM45-J - Installation - Manual

I SSUED: 5-25-95 SHEET #081-9002-5 09-10-04
Visit the Peerless Web Site at www.peerlessindustries.com For customer service call 1-800-729-0307 or 708-865-8870.
1 of 2
INSIDE DIMENSIONS
MODEL # WIDTH (W) HEIGHT (H)
VPM35-J, VPM35-JS, SVPM35-J, SVPM35-JS 10.25" - 14.25" (260 mm - 362 mm) 2.69" - 4.5" (68 mm - 114 mm)
VPM40-J, VPM40-JS, SVPM40-J, SVPM40-JS 13.25" - 17.25" (337 mm - 438 mm) 2.69" - 4.5" (68 mm - 114 mm)
VPM45-J, VPM45-JS, SVPM45-J, SVPM45-JS 13.25" - 17.25" (337 mm - 438 mm) 4.25" - 5.75" (108 mm - 146 mm)
Installation and Assembly -
VCR Mount for Jumbo
® Mounts
Models:
VPM35-J, VPM35-JS, VPM40-J, VPM40-JS,
VPM45-J, VPM45-JS, SVPM35-J, SVPM35-JS,
SVPM40-J, SVPM40-JS, SVPM45-J, SVPM45-JS
!
!
!
!
!
!
! !
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
VPM35-J, VPM35-JS SVPM35-J, SVPM35-JS VPM40-J, VPM40-JS SVPM40-J, SVPM40-JS VPM45-J, VPM45-JS SVPM45-J, SVPM45-JS Description
10-24 x 1/2 carriage bolt
10-24 nylock nut
#10 SAE flat washer
M5 x .8 x 8 mm phillips screw
penta-pin tool (not shown)
VCR Bracket
hanger bracket
Parts List
A
B
C
D
E
F
N
Qty.
8
8
8
8
1
1
1
Black
Part Number
520-9523
530-9341
540-9400
520-1167
520-9249
1255-275
Parts may appear slightly different than illustrated.
Check parts list. Be sure all parts listed are included with your product.
Note: The PentaPin tool is only included with security models (SVPM models)
N
A
B
C
There was an enhancement made to the Jumbo TM and Jumbo 2000 TM TV mounts in 1999 to allow the VCR mount to
be added after the TV has been installed. Depending on the style you are using, you will complete your installation
one of the following two ways. As a result, you will not use all of the fasteners provided.
Follow this installation if your TV mount has slots in the center
of the tray rather than threaded holes. If you have this style, the
TV will have to be removed to complete the installation
of the VCR mount. Follow this installation if your TV mount has four threaded holes
in the center of the tray. The TV does not have to be removed
for you to install your VCR mount.
Attach VCR as
shown using parts
N, A, B, C, and D.
1
Attach VCR as
shown using parts
N, and D.
1
Adjust the VCR mount
as shown to fit your
equipment.
2
N
A
B
C
N
D
D
D
F
Silver
Part Number
520-2104
530-9342
540-9442
520-2167
520-9249
081-4086