Peerless-AV ACC918 - Installation - Manual

1 of 2 ISSUED: 07-18-05 SHEET #: 095-9244-2 03-10-06
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
Installation and Assembly - Security Fasteners for 10" - 25"
LCD Screens with VESA
® 75 and VESA 100 Mounting Patterns
Model: ACC 918
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
DD Description Qty. Part #
AA M4 x 12 mm serrated washer head socket pin screw 4 510-1079
BB M4 x 20 mm serrated washer head socket pin screw 4 510-1061
CC .198" x .313" x .437" H retaining spacer 4 590-5005
DD 4 mm security allen wrench 1 560-9646
Parts List
CC BB
Insert two M4 x 12 mm screws (AA) into top two
holes of screen, leaving approximately 1/4" of
exposed thread. Hook screws onto keyslots of
adapter plate as indicated in figures 1.1 and 1.2.
*Note: If hole pattern is in a pocket, insert two M4 x
20 mm screws (BB) with two retaining spacers (CC)
into top two holes of screen as indicated right.
1
fig. 1.1
• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
WARNING
1/4"
*For screens with a
hole pattern in a
pocket, spacers (CC)
go between adapter
plate and screen.
CC
ADAPTER
PLATE
FOR VESA ® 75
MOUNTING PATTERN:
FOR VESA 100
MOUNTING PATTERN:
fig. 1.2
Screen may appear
slightly different than
illustrated
AA
AA