PowerWalker ViewPower PowerWalker User Manual

Page 34

remote shut down PCs which are powered by monitored UPS.

Step 1

Select UPS Setting >> Local Shutdown or click shortcut icon

. Refer to

Diagram 5-11.

Diagram 5-11

NOTE: This screen may be different for different types of UPSs.

Step 2

Select shutdown conditions and power-off options, set delay time to shutdown

system.

Step 3

Enter time for pop-up dialog before shutdown and warning interval in Warning

Dialog Setting area.

Step 4

Click “Apply” button to save all data.

NOTE:

Click “Default” button to recover the default setting.

Conditions:

When the UPS is running from battery, shut down local system after xx min xx

sec: When clicking the checkbox, local PC will start to shut down after monitored

UPS works on battery mode for xx min xx sec time. The maximum setting

number for minutes is 999, and for seconds is 59.