PowerWalker ViewPower PowerWalker - Manual (Page 26)

25
Diagram 5-2
Step 2 Select communication port and baud rate.
Step 3 Enter mobile phone numbers in “Phone no.” column and click “Add” button to
add phone no. in Receivers List. To delete numbers, simply select phone no.
from “Receivers list” and click “Delete”.
Step 4 Click “Apply” button to save all changes. The “Test” button can be used to send
test SMS to confirm the correct operation. If all parameters are set up correctly,
system will send a test message to all receivers and pop up a successful
message. (Refer to Diagram 5-3) Otherwise, it will pop up a failure dialog to
indicate there is an error for parameter setting. (Refer to Diagram 5-4)