Peterson Sonuus Wahoo - Manual (Page 31)

Wahoo © Copyright 2012 Sonuus Limited 31
Owner’s Manual
Special key presses
Factory presets
The 100 Wahoo factory presets are arranged in 10 groups, summarised in the table below.
Mode Key Presses
Filter calibration:
enter
save and exit
cancel and exit
Simultaneously press and hold FILTER button + FILTER knob for 4s until CAL is
displayed.
Press save.
Press and hold save to cancel.
Pedal calibration:
enter
save and exit
cancel and exit
Simultaneously press and hold FILTER button + MODE knob for 4s until CAL is
displayed.
Press save.
Press and hold save to cancel.
Battery monitoring Simultaneously press and hold FILTER + S S S S to display % battery charge.
Firmware update mode:
enter
exit
Simultaneously press and hold FILTER + S S S S when powering-on the Wahoo.
Restart the Wahoo.
Cancel edit
(enter Preset Select mode)
Press and hold save for 2s.
Foot-operated preset mode
enter/exit Press and hold footswitch until footswitch LED starts/stops flashing.
Display firmware version
Press and hold save on power-on
(version number is shown until you release the save button).
Factory Preset Number Description
F00– F09 Pedal mode. Variations of 1 filter, but sometimes 2, e.g., octaves.
F10– F19 Pedal vowel sounds: some clean, some throaty.
F20– F29 Touch wah/guitar.
F30– F39 Bass envelope.
F40– F49 LFO (not stepped).
F50– F59 LFO stepped—more rhythmic.
F60– F69 LFO beats—one filter providing a beat, the other sometimes in another mode.
F70– F79 Pitch-bend and pitch-track.