Owner’s manual, Pedal calibration, Warranty – Peterson Sonuus Wahoo User Manual

Page 29

Wahoo

Owner’s Manual

Pedal calibration

Pedal calibration lets you configure the how much of the travel of the footpedal controls the effect.
Normally you won’t need to do this but if you make modifications such as limiting the travel of the
Wahoo by sticking a rubber stop under the front of the footpedal, then this calibration will be useful.
Enter calibration mode by simultaneously pressing and holding the

FILTER

button and the

MODE

knob

for 4s until

CAL is displayed. Rock the footpedal from one extreme to the other a few times. Save this

calibration and exit calibration mode by pressing the

save button or with another simultaneous

press of the

FILTER

button and the

MODE

knob.

If you enter calibration mode accidentally and want to exit without saving, press and hold the

save

button to cancel.

Warranty

The Wahoo is supported by a limited warranty for a period of one year form the date of purchase.
During this period, any faults due to defective materials or workmanship will be rectified (by repair
or replacement) free of charge. A unit under warranty may be replaced with a reconditioned unit.
The warranty excludes damage caused by deliberate or accidental misuse or modification. It is the
user’s responsibility to ensure fitness for purpose in any particular application. The warranty is
limited to the original purchaser, and excludes any consequential damage or loss.
Proof of purchase date is required for any claim under this warranty.
Warranty claims must be made through the retailer from whom the original purchase was made.