Owner’s manual, Custom settings, Wahoo – Peterson Sonuus Wahoo User Manual

Page 27

Wahoo

Owner’s Manual

Custom settings

Further configurability of the Wahoo is possible through

custom. This lets you change the setup of

the Wahoo to suit your own instruments or personal preferences. For example, you can adjust the
display

LED

brightness to a very low level to prolong battery life or to suit working in a darkened

studio.
The custom settings are different from all of the other parameters: they affect the Wahoo’s set-up,
not the set-up of the current preset

i.e.,

they are global settings. The custom settings are not stored

in a preset, they are stored in the Wahoo itself. They take effect from when they are changed. They
are not changed by switching from one preset to another.
To make changes to the custom sub-parameters, enter

custom mode by pressing and holding the

MODE

knob for 2s.

Custom

sub-

parameter

Default

Range

Description

LEd

1–100

LED

brightness: 1 is minimum, 100 maximum. Reducing the

LED

brightness is useful for dark environments and for battery saving.

int

gtr

bA4

bA5

Instrument (used for pitch-tracking and envelope-tracking)

guitar (perfect for guitar, but also good for 4-string bass. Use this

unless you need optimal pitch-tracking of the lowest notes.)

4-string bass (best to track the lowest notes of 4-string bass, but

also works well with 5-string bass)

5-string bass (best to track the lowest notes of 5-string bass)

SEn

−60–60

Applies a global adjustment for

envelope mode sensitivity (SEn) to

compensate for instruments with different output levels.

Gives a range of ±24dB.

P.En

oFF, on

Pedal enable. Allows you to enable the effect by moving the

footpedal to the “toe-down” position rather than having to first

press the footswitch.

g.At

0–200

Noise gate attack—how quickly the noise gate moves the filter

cutoff frequency when the output falls to below the threshold set.

FS.t

4 (2s)

oFF, 1–8

Footswitch time. Time in 500ms steps that footswitch is held to

enter and exit foot-operated preset selection mode.