Peterson Sonuus Wahoo - Manual (Page 3)

Wahoo © Copyright 2012 Sonuus Limited 3
Owner’s Manual
Quick start
This manual is a comprehensive guide to the Wahoo. To start using it as quickly as possible, follow
this short guide. Please refer to the rest of the manual for detailed operating instructions.
c c c c Connect your guitar/bass to the IN jack of the Wahoo.
d d d d Connect your amplifier to the OUT jack of the Wahoo.
e e e e Set the
LOCK
switch to the locked position (this lets you select presets without worrying about
editing them by mistake).
f f f f Connect a suitable power supply: 9V DC , USB or batteries (see “Powering the Wahoo” on page 8).
g g g g Select the first factory preset by pressing the T T T T button until F00 is shown on the numeric display.
h h h h Tap the footswitch to enable the effect. The footswitch LED will light up.
i i i i Rock the footpedal back and forward while you are playing to obtain the classic Wah effect. In the
“toe-down” position high frequencies will be enhanced. In the “heel-down” position, low frequencies
will be enhanced and high-frequencies will be muffled.
Next, start exploring other presets using the S S S S and T T T T buttons. There are 100 factory presets
labelled as F00–F99, then 100 user presets labelled P00–P99. If you press and hold S S S S or T T T T you can
increment or decrement in steps of 10 so you can quickly select the preset you want.
To get started, we suggest you select from the following:
Preset (guitar) Description Preset (bass) Description
F00 Classic wah pedal F03 Classic bass wah pedal
F10 Vocal wah pedal F34 Funky bass envelope
F20 Touch wah (not pedal) F81 Bubbly envelope
F42
Phasor-like dual-filter
(Pedal controls tempo)
F40
Vocal dual-filter LFO
(Pedal controls tempo)
F50
Stepped LFO , arpeggiator-like
(Pedal controls tempo)
F53
Stepped LFO (low-pass)
(Pedal controls tempo)
F61
LFO beat, with saw-up LFO
(Pedal controls tempo)
F63
LFO beat, with funk
(Pedal controls tempo)