B&B Electronics VESR321_ML_SL - Manual - Manual (Page 22)

Properties
www.bb-elec.com
www.bb-europe.com
18
IP Address
Software or hardware attempting to access the serial server via the network must know the IP
Address of the server. In DHCP mode (factory default), the serial server requests and receives a
dynamic IP address from a DHCP server when it first connects to the network. If there is not a
DHCP Server on your network, this device will automatically default to IP Address
169.254.102.39. If the serial server is unable to connect to your network using this address, there
are two methods to manually configure the IP Address.
1. Method One: Change your PC Network to Match the Serial Server
a. Open the network connection on your PC