B&B Electronics ESP904 - Manual User Manual
Page 51
Installing Virtual COM Port
Manual Documentation Number: ESP904-4513m
Chapter 6
41
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Figure 39. The Windows Logo Testing Window
This XP/Vista feature simply indicates that these drivers have not yet
undergone the Microsoft testing procedures required to use the Windows
XP/Vista Logo on the packaging. Driver compatibility is not affected.
Step 4: Click
Continue Anyway
to proceed with the installation.
The Protocol TCP/UDP, IP Address, and Port Number will mirror the
settings of the selected serial server.
Step 5: After setting all four ESP Serial Ports as virtual COM ports, click
Cancel
on the
Found Server
form.
N
N
o
o
t
t
e
e
:
:
PCs may have hardware COM ports and devices such as Modems, IR ports or
USB based COM ports that are not currently connected Try selecting a COM
number above COM4 if problems occur.
The default
Flow Control
setting is
None
. RTS/CTS can be selected if used
by the application program and serial hardware. The ESP Server must be set
to match.