B&B Electronics ESP904 - Manual - Manual (Page 30)

Using ESP Manager
20 Chapter 4 Manual Documentation Number: ESP904-4513m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com

Searching Server - Searches for Serial Servers on the network and
brings back configuration information that will be displayed in the
Server Properties window.

Uninstall Virtual COM - Allows virtual COM ports to be uninstalled
from the ESP Manager window.

Monitor Port Status - Brings up a screen that displays the following
information associated with the selected serial port.
Figure 18. The Port Status Window
o Serial TX: Displays the number of bytes of data sent to the
serial device since the IP connection was established.
o Serial RX: Displays the number of bytes of data received from
the connected serial device since the IP connection was
established.
o DTR/RTS: The
DTR/RTS Port Status indicator displays the
current logic state of the DTR and RTS hardware handshake
(output) lines for the selected
Serial Server port (1 = asserted, 0
= not asserted)
o DCD/DSR/CTS: The
DCD/DSR/CTS Port Status indicator
displays the current logic state being received on the DCD,
DSR and CTS hardware handshake (input) lines of the selected
Serial Server port (1 = asserted, 0 = not asserted)
o Status: Indicates whether the client software has made a
connection with the Serial Server.
o IP Address: Displays the IP address of the connected client
when there is a client connection

Save Configuration File - Allows the user to save the current
configuration information to a file with a .vcom extension.

Load Configuration File - Allows the user to load a configuration file.