Rainbow Electronics AT24C16A User Manual
Wire serial eeprom, Features, Description

1
Features
•
Write Protect Pin for Hardware Data Protection
– Utilizes Different Array Protection Compared to the AT24C02/04/08/16
•
Low-voltage and Standard-voltage Operation
– 2.7 (V
CC
= 2.7V to 5.5V)
– 1.8 (V
CC
= 1.8V to 5.5V)
•
Internally Organized 256 x 8 (2K), 512 x 8 (4K), 1024 x 8 (8K) or 2048 x 8 (16K)
•
2-wire Serial Interface
•
Schmitt Trigger, Filtered Inputs for Noise Suppression
•
Bi-directional Data Transfer Protocol
•
100 kHz (1.8V, 2.5V, 2.7V) and 400 kHz (5V) Clock Rate for AT24C02A, 04A and 08A
•
100 kHz (1.8V) and 400 kHz (2.5V, 2.7V and 5V) Clock Rate for AT24C16A
•
8-byte Page (2K), 16-byte Page (4K, 8K, 16K) Write Modes
•
Partial Page Writes are Allowed
•
Self-timed Write Cycle (10 ms max)
•
High Reliability
– Endurance: One Million Write Cycles
– Data Retention: 100 Years
•
Automotive Grade and Extended Temperature Devices Available
•
8-lead JEDEC SOIC, 8-pin PDIP, and 8-lead TSSOP Packages
Description
The AT24C02A/04A/08A/16A provides 2048/4096/8192/16384 bits of serial electri-
cally erasable and programmable read only memory (EEPROM) organized as
256/512/1024/2048 words of 8 bits each. The device is optimized for use in many
industrial and commercial applications where low power and low voltage operation are
essential. The AT24C02A/04A/08A/16A is available in space saving 8-pin PDIP, 8-lead
JEDEC SOIC, and 8-lead TSSOP (AT24C02A/04A) packages and is accessed via a
2-wire serial interface. In addition, the entire family is available in 2.7V (2.7V to 5.5V)
and 1.8V (1.8V to 5.5V) versions.
2-wire Serial
EEPROM
2K (256 x 8)
4K (512 x 8)
8K (1024 x 8)
16K (2048 x 8)
AT24C02A
AT24C04A
AT24C08A
AT24C16A
Rev. 0976D–12/01
Pin Configurations
Pin Name
Function
A0 - A2
Address Inputs
SDA
Serial Data
SCL
Serial Clock Input
WP
Write Protect
NC
No-connect
8-pin PDIP
1
2
3
4
8
7
6
5
A0
A1
A2
GND
VCC
WP
SCL
SDA
8-lead SOIC
1
2
3
4
8
7
6
5
A0
A1
A2
GND
VCC
WP
SCL
SDA
8-lead TSSOP
1
2
3
4
8
7
6
5
A0
A1
A2
GND
VCC
WP
SCL
SDA
Document Outline
- Features
- Description
- Block Diagram
- Pin Description
- Memory Organization
- Pin Capacitance
- Device Operation
- Bus Timing (SCL: Serial Clock, SDA: Serial Data I/O)
- Write Cycle Timing (SCL: Serial Clock, SDA: Serial Data I/O)
- Data Validity
- Start and Stop Definition
- Output Acknowledge
- Device Addressing
- Write Operations
- Read Operations
- AT24C02A Ordering Information
- AT24C04A Ordering Information
- AT24C08A Ordering Information
- AT24C16A Ordering Information
- Packaging Information