Rainbow Electronics AT25F4096 - Manual

Features
• Serial Peripheral Interface (SPI) Compatible
• Supports SPI Modes 0 (0,0) and 3 (1,1)
– Datasheet describes Mode 0 Operation
• 20 MHz Clock Rate
• Byte Mode and 256-byte Page Mode for Program Operations
• Sector Architecture:
– Eight Sectors with 64K Bytes Each (4M)
– 256 Pages per Sector
• Product Identification Mode
• Low-voltage Operation
– 2.7 (V
CC
= 2.7V to 3.6V)
• Sector Write Protection
– Protect 1/8, 1/4, 1/2 or Entire Array
• Write Protect (WP) Pin and Write Disable Instructions for
both Hardware and Software Data Protection
• Self-timed Program Cycle (30 µs/Byte Typical)
• Self-timed Sector Erase Cycle (1 second/Sector Typical)
• Single Cycle Reprogramming (Erase and Program) for Status Register
• High Reliability
– Endurance: 10,000 Write Cycles Typical
• 8-lead EIAJ SOIC
Description
The AT25F4096 provides 4,194,304 bits of serial reprogrammable Flash memory
organized as 524,288 words of 8 bits each. The device is optimized for use in many
industrial and commercial applications where low-power and low-voltage operation
are essential. The AT25F4096 is available in a space-saving 8-lead EIAJ SOIC
package.
SPI Serial
Memory
4M (524,288 x 8)
AT25F4096
Advance
Information
2454C–SEEPR–8/04
Pin Configurations
Pin Name Function
CS Chip Select
SCK Serial Data Clock
SI Serial Data Input
SO Serial Data Output
GND Ground
VCC Power Supply
WP Write Protect
HOLD Suspends Serial Input
8-lead EIAJ SOIC
1
2
3
4
8
7
6
5
CS
SO
WP
GND
VCC
HOLD
SCK
SI