Rainbow Electronics W27E520 - Manual (Page 4)

Advance Information W27E520
- 4 -
DC CHARACTERISTICS
Absolute Maximum Ratings
PARAMETER RATING UNIT
Ambient Temperature with Power Applied -55 to +125
°
C
Storage Temperature -65 to +150
°
C
Voltage on all Pins with Respect to Ground Except
OE /V PP, A9 and V DD Pins
-2.0 to +7.0 V
Voltage on OE /V PP Pin with Respect to Ground -2.0 to +7.0 V
Voltage on A9 Pin with Respect to Ground -2.0 to +7.0 V
Voltage V DD Pin with Respect to Ground -2.0 to +14.0 V
Note: 1. Exposure to conditions beyond those listed under Absolute Maximum Ratings may adversely affect the life and reliability of
the device.
2. Minimum voltage is -0.6V DC which may undershoot to -2.0V for pulses of less than 20ns. Maximum output pin voltage is
V DD +0.75V DC which may overshoot to +7.0V for pulses of less than 20ns.
DC Erase Characteristics
(T A = 25
°
C
±
5
°
C, V DD = 6.5V
±
0.25V)
PARAMETER SYM. CONDITIONS LIMITS UNIT
MIN. TYP. MAX.
Input Load Current I LI V IN = V IL or V IH -10 - 10
µ
A
V DD Erase Current I CP ALE = V IH, OE /V PP = V PE
A8&A11 = V IL , A9 = V PE ,
A10 = V IH , Others = X
- - 30 mA
V PP Erase Current I PP ALE = V IH, OE /V PP = V PE
A8&A11 = V IL , A9 = V PE ,
A10 = V IH , Others = X
- - 30 mA
Input Low Voltage V IL - -0.3 - 0.8 V
Input High Voltage V IH - 2.4 - V DD +0.3 V
Output Low Voltage
(Verify) V OL I OL = 2.1 mA - - 0.45 V
Output High Voltage
(Verify) V OH I OH = -0.4 mA 2.4 - - -
A9 SID Voltage V HH V DD = 5V
±
10% 11.5 12 12.5 V
A9 Erase Voltage V PE - 12.75 13 13.25 V
V PP Erase Voltage V PE - 12.75 13 13.25 V
V DD Supply Voltage (Erase
& Erase Verify)
V DE - 6.25 6.5 6.75 V
Note: V DD must be applied simultaneously or before V PP and removed simultaneously or after V PP .
CAPACITANCE
(V DD = 4.5V to 5.5V, T A = 25
°
C, f = 1 MHz)
PARAMETER SYMBOL MAX. UNIT
Input Capacitance C IN V IN = 0V 6 pF
Output Capacitance C OUT V OUT = 0V 12 pF