RocketFish RF-TVML70 - User Manual - Manual (Page 10)

10 Need help? Call 800-620-2790
RF-TVML70 TV Wall Mount
STEP 5 - Determine wall-mount location
Notes:
• For more detailed information on determining where to drill your holes, visit our online height-finder at:
http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder
• Your TV should be high enough so your eyes are level with the middle of the screen. Normally, 40 to 60 inches
from the ground.
When your TV is initially mounted on the wall, it will normally be mounted in its highest position. You will only
be able to lower your TV (approximately 16 inches) from this position.
1
Measure the distance from the bottom of your TV to the middle (half of the height of the TV). This is
measurement a.
2 Measure the distance from the floor to where you want the bottom of the TV to be positioned on the wall
(we recommend approximately 42” from the floor for comfortable sit-stand viewing). Keep in mind that this
TV mount allows for 16" of travel vertically downward from the initial mounting position. This is
measurement b.
3 Add a + b. This measurement is the height where you want the center of your TV to be.
4 Use a pencil to mark this spot on the wall.
You’ll need
a
b
CAUTION: Risk of electrical
shock. To ensure safe use of
this product, install power
outlets or supplies outside of
the horizontal rails. Do not
route electrical cords within
the path of the horizontal
rails. Be aware of pinch
points when routing cables.
Failure to heed this caution
may result in equipment
damage or personal injury.
Refer to “STEP 9 - Installing
the cable wrap and cable
ties” on page 16, for
information on how to
appropriately route your
power, HDMI, and AV cables.
Measuring tape
Pencil
RF-TVML70_13-0455_MAN_V3_ENG.fm Page 10 Monday, May 6, 2013 7:45 AM