Platform and handrail assembly – Grain Systems Tanks PNEG-1093 User Manual

Page 46

Text mode
Original mode

6. Installation

PNEG-1093 2.66" Corrugation Unstiffened Bin

Platform and Handrail Assembly

Start by attaching the platform to the platform support using 5/16" x 3/4" bolts and nuts. Place all
the vertical angles in place, making sure to place the vertical entrance angle to the left front corner
of the platform. After all vertical angles are in place, attach front and side handrails as shown in

Figure 6N.

Use 5/16" x 3/4" bolts and nuts in all connections.

Figure 6N