Platform support assembly – Grain Systems Tanks PNEG-1093 User Manual

Page 43

Text mode
Original mode

6. Installation

PNEG-1093 2.66" Corrugation Unstiffened Bin

Platform Support Assembly

When starting the platform support, attach the mounting angle to the sidewall of the grain bin. Refer to

Page 40

for the correct holes to be used by the platform. Attach the angle using 5/16" x 3/4" bolts and

nuts, tighten at this time. Next, bolt the support angle to the mounting angle again using the proper holes.
Attach the brace angle to the mounting angle as shown in

Figure 6I

below. Use 5/16" x 3/4" bolts and

nuts for all connections.

Figure 6I