Grain Systems Tanks PNEG-1093 - Manual (Page 41)

6. Installation
PNEG-1093 2.66" Corrugation Unstiffened Bin 41
Eave Starter Bracket and Ladder Placement for External Ladder without
Cage or Platform
Ladder placement on the grain bin is very important at this time. Refer to Figure 6G below and follow the
correct dimensions as shown. The ladder starter brackets must be located in line with the horizontal seam.
Check the 4' ladder section to make sure the ladder rung dimples are to the top surface and attach to the
starter brackets using the hole located 1" from top of the ladder. Now all standoff brackets must be located
in horizontal seam holes (repeating every 32") and attached to each additional 4 foot ladder section
required. (Use 5/16" x 3/4" bin bolts for these connections.)
Figure 6G