Grain Systems Bin Accessories PNEG-1096 User Manual

Page 74

PNEG-1096 Ladder, Safety Cage, & Platforms

2.66 (OPTIONAL)

LADDER
SECTION
LDR-4002

LADDER PLACEMENT

Ladder placement on the grain bin is very important at this time. Refer to the diagrams above and
follow the correct dimensions as shown. Ladder extension must be located 8" below the horizon-
tal seam. Check your ladder to make sure the ladder rung dimples are to the top surface. Attach
extension bracket (LS-6676) to sidewall. Extension bracket brace and ladder standoff will attach
to upper hole in extension bracket, refer to diagrams for orientation. Attach ladder to the standoffs
using the holes located 6 1/4" from the end of ladder section. Use 5/16" x 3/4" bin bolts for these
connections. Now all extension brackets must be located in horizontal seam holes (repeating
every 32") until reaching the first rest platform. Extension bracket braces (LS-6704) attach at
every other horizontal seam. Refer to the section in these instructions that references the location
of intermediate rest platforms for further hole locations.

LADDER
EXTENSION BRACKET
LS-6676

OUTSIDE
STAND-OFF
LS-121

LADDER EXTENSION

BRACKET BRACE

LS-6704

REV. 10/9/01