Grain Systems Bin Accessories PNEG-1096 - Manual (Page 14)

14 PNEG-1096 Ladder, Safety Cage, & Platforms
2.66 INSIDE STIFFENED
EXTENSION ANGLE DETAIL
LS-373
Platform
LS-5283
SafetyCage Hoop
Adapter Angle
LS-6697
Safety Cage Platform
Extension Angles
(Flours. Green)
LS-294
End Handrail
24.3/8" (White)
LS-295
Front Handrail
31.7/8" (Black)
LS-371
Platform Vertical
Angle 42" (Yellow)
LS-372
Vert. Entrance Angle
46" (Orange)
PLATFORM AND HANDRAIL
ASSEMBLY
Start by attaching the platform itself to
the platform support using 5/16" x 3/4"
bolts and nuts. Place all the vertical
angles in place, making sure to place
the vertical entrance angle to the left
front corner of the platform. After all ver-
tical angles are in place attach front and
side handrails as shown in the diagram.
Use 5/16" x 3/4" bolts and nuts in all
connections.
EAVE SAFETY CAGE &
INTERMEDIATE REST PLATFORM
Before attaching any pieces to the lad-
der or platform some preassembly will
be required. Take the safety cage hoop
adjuster plate and the safety cage
adapter hoop and bolt together using the
proper holes, (as shown on following
page.) Be sure the proper holes are used
depending on the diameter of the grain
bin. Be sure to use the 5/16" x 3/4" bolt
with the head of the bolt to the inside of
the safety cage. Using the improper
holes will make the safety cage more dif-
ficult to assemble. You may now bolt this
assembly to the safety cage hoop half,
tighten bolts as you go. One of the as-
semblies will take 2 hoop halves and be
positioned just below the platform as
shown in the diagram. Take the assem-
bly and attach to the safety cage bracket
and to the platform extension angle or
the hoop adapter angle. Refer to the dia-
gram for more information. If holes don't
align properly go back and make sure
the ladder and platform are correctly po-
sitioned on grain bin in relationship to one
another. Make any corrections necessary
to complete the assembly as shown.
REV. 9/13/01
Platform
LS-5285 Safety
Cage Hoop
Adjuster Plate
LS-5284 Safety Cage
Adapter Hoop
LS-4351 Safety Cage
Hoof Half
Extension Angle
41" (T
yp.)
Extension Rails or Ladder
(Ladder to be used on
Intermediate Platform)