Grain Systems Bin Accessories PNEG-1096 - Manual (Page 46)

46 PNEG-1096 Ladder, Safety Cage, & Platforms
4.00 INSIDE STIFFENED
INSIDE LADDER SUPPORTS
After completing the inside ladder it will be necessary to support the bottom of the ladder
to the concrete. Depending on the actual installation, the amount of support may vary. The
supports are not supplied by the manufacturer. Usually the supports can be made of 1" x 1" x 1/
8" angle iron bolted directly to the ladder using 2 bolts 5/16" x 1". If a bin sweep is to be used in
the grain bin, other considerations may be necessary to assure there is no
interference with the equipment.
SUPPORTS ARE NOT SUPPLIED
BY GRAIN SYSTEMS, INC.
SUPPORTS ARE NOT SUPPLIED BY GSI