Grain Systems Bin Accessories PNEG-1096 - Manual (Page 18)

18 PNEG-1096 Ladder, Safety Cage, & Platforms
2.66 INSIDE STIFFENED
ITEM
LS
-5293 6 R
ings
LS
-5294 7 R
ings
LS
-5295 8 R
ings
LS
-5296 9 R
ings
LS
-5297 10 R
ings
LS
-5298 11 R
ings
LS
-5299 12 R
ings
LS
-5300 13 R
ings
LS
-5301 14 R
ings
LS
-5302 15 R
ings
LS
-5303 16 R
ings
LS
-5304 17 R
ings
LS
-5305 18 R
ings
LS
-5306 19 R
ings
LS
-5307 20 R
ings
LS
-5308 21 R
ings
LS
-5309 22 R
ings
LS
-5310 23 R
ings
LS
-5311 24 R
ings
LS
-5312 25 R
ings
LS
-5313 26 R
ings
LS
-5314 27 R
ings
LS
-5315 28 R
ings
LS
-5316 29 R
ings
LS
-5317 30 R
ings
LS
-5318 31 R
ings
LS
-5319 32 R
ings
LS
-6693 33 R
ings
LS
-6694 34 R
ings
LS
-6707 35 R
ings
LS
-6708 36 R
ings
LS
-6709 37 R
ings
Safety Cage Bell Size 44 44 22 22 44 44 22 44 44 44 44 44 22 22 22 22 22 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44
Safety Cage Bell Size 22 44 22 22 22 22 44 44 44 44 22 22 22 22 22 22 22 44 44 44 22 22 22 22 22
Safety Cage Bell Size 22 22 22 44 44 44 44 44 22 22 22 22 22 22
Safety Cage Bell Size 44 44 44 44 44
REV. 9/13/00
22" PACKAGE PART NUMBER IS LS-4363LB
44" PACKAGE PART NUMBER IS LS-4364LB
LS-4354 Safety Cage
22" Vertical Support
LS-4352 Safety Cage
Bell Hoop Half (Red)
LS-4352 Safety Cage
Bell Hoop Half (Red)
LS-4353 Safety Cage
44" Vertical Support
SAFETY CAGE BELL SECTIONS (22" or 44")
The safety cage bell section is to be used at the point of termination of the safety cage just
above the rest platforms or the concrete. Refer to the usage chart at the bottom of the page to
determine the correct bell section, attach the vertical supports to the existing hoop halves. Now,
fasten the bell safety cage brackets (red) to the ladder (some field drilling may be necessary at
this point.) Attach the special bell safety cage hoop halves to the bell brackets and attach the
vertical supports to the bell hoop halves. The vertical supports will have to be bent at the flat
area to allow for the angle of the bell section.
BELL SAFETY CAGE LOCATION CHART
THE BELL SAFETY CAGE PACKAGE GOES ON THE BOTTOM OF A RUN OF SAFETY CAGE AND TERMINATES
JUST ABOVE THE CONCRETE OR PLATFORM. THE CHART GIVES THE SIZE OF BELL SECTION (22" or 44")
TO BE USED WITH THE RUN OF SAFETY CAGE STARTING AT THE TOP RING OF GRAIN BIN COMING DOWN
AND ENDING JUST ABOVE THE PLATFORMS AND/OR CONCRETE. FOLLOW THE DIAGRAMS AND THE
PROPER LETTER DESIGNATION AND REFERENCE THE CHART BELOW FOR PROPER SAFETY CAGE PLACE-
MENT.