Grain Systems Bin Accessories PNEG-1096 - Manual (Page 28)

28 PNEG-1096 Ladder, Safety Cage, & Platforms
2.66 OUTSIDE STIFFENED
EAVE SAFETY CAGE
Before attaching any pieces to the ladder or platform, some preassembly will be re-
quired. Take the safety cage hoop adjuster plates and bolt them onto the extension angle as
shown. Bolt the safety cage adapter hoops and safety cage hoop halves together using the
proper holes, as shown. Be sure to use the 5/16" x 3/4" bolt with the head of the bolt to the
inside of the safety cage. You may now bolt these assemblies to the safety cage brackets and
hoop adjuster plates, tighten bolts as you go. One of the assemblies will take 2 hoop halves
and be positioned just below the platform as shown in the diagram.
44'' TYP.
BOTTOM TO BOTTOM
LS-4351 SAFETY CAGE
HOOP HALF
LS-5284 SAFETY CAGE
HOOP ADAPTERS
LS-5285 SAFETY CAGE
HOOP ADJUSTER PLATE
PLATFORM ASSEMBLY
LS-6696 (GREEN)
EXTENSION RAIL
LS-6697 (FL. GREEN)
EXTENSION ANGLES
LS-6622 SAFETY CAGE
HOOP ADJUSTER ANGLE