Grain Systems Bin Accessories PNEG-1451 - Manual (Page 86)

8. 4.00" Corrugation Farm Commercial Hopper Tank (FCHT) 7-9 Rings
86 PNEG-1451 Ladder, Safety Cage and Platform for Hopper Tanks
Eave Adjustable Braces
The eave adjustable braces must be attached at this time. An eave adjustable brace is comprised of one
larger diameter tube and two (2) smaller tubes.
(See Figure 8F.) Slip the smaller tubes inside the larger
tubes and attach one smaller tube to the top of the ladder extension rail. Adjust the other smaller tube so
the bottom of the flattened tube reaches the roof panel. Field drill four (4) 5/16" holes through both large
and small tubes and bolt together using 1/4" x 1-1/2" bolts and nuts. This prevent the adjustable braces
from slipping.
(See Figure 8G.)
NOTE: Refer to Page 84 for proper location of ladder starter brackets.
Figure 8F
Figure 8G
NOTE: Refer to general detail information on Page 12 for additional details for standoff bracket to ladder
assembly and cage hoop bracket to ladder.