Grain Systems Bin Accessories PNEG-1451 - Manual (Page 77)

7. 4.00" Corrugation Farm Commercial Hopper Tanks (FCHT) 4-6 Rings
PNEG-1451 Ladder, Safety Cage and Platform for Hopper Tanks 77
Left Hand Platform and Platform Support Assembly
NOTE: Mount the platform supports on the bin first. Next, assemble the platform floor onto the support
frame. Do not tighten platform support to floor brace bolts until the floor and toe plates are secure.
Assemble the platform support frame using 5/16" x 3/4" truss head bolts and nuts. When attaching the
platform mounting angles to the stiffeners, locate the mounting angles according to the instructions on
previous pages. Align holes on the platform floor with the holes on platform supports and bolt together
using 5/16" x 3/4" truss head bolts and nuts. Attach platform toe plates at the same time as attaching the
platform floor. The vertical entrance angle bolts to the platform floor, toe plate and platform support. The
handrail post bolts to the platform floor and toe plate as shown in
Figure 7R .
Figure 7R Left Hand Platform
Figure 7S Left Hand Platform Support Assembly