Grain Systems Bin Accessories PNEG-1451 - Manual (Page 60)

6. 2.66" Corrugated Commercial Hopper Tank 10-22 Rings
60 PNEG-1451 Ladder, Safety Cage and Platform for Hopper Tanks
Left Hand Platform and Platform Support Assembly
NOTE: Mount the platform mounting angles supports on the column first. Next, assemble the platform floor
onto the support frame. Do not tighten platform support to floor brace bolts until the floor and toe
plates are secure.
Assemble the platform support frame using 5/16" x 3/4" truss head bolts and nuts. Align holes on the
platform floor with the holes on platform supports and bolt together using 5/16" x 3/4" truss head bolts and
nuts. Attach platform toe plates at the same time as attaching the platform floor. The vertical entrance
angle bolts to the platform floor, toe plate and platform support. The handrail post bolts to the platform floor
and toe plate as shown in
Figure 6AB .
Figure 6AA Left Hand Platform Support Assembly
Figure 6AB Left Hand Platform