Banks Power Dodge Trucks: (Diesel ’03 - 07 5.9L Cummins) PowerPack & Stinger w_EconoMind '06-07 For use with PowerPDA User Manual

Page 31

96813 v.9.0

Your EconoMind Diesel Tuner displays

the “4,3” diagnostic code (refer to

TROUBLESHOOTING in Section

10 on how to read codes) when it

needs to learn your transmission

configuration. This always occurs

when the EconoMind Diesel Tuner

is first installed on the truck. The

EconoMind Diesel Tuner is equipped

with advanced safety features to

preserve your automatic transmission.

One of them is the capability to detect

the occurrence of transmission slip,

and it will automatically de-rate the

engine output power accordingly.
Before this safety feature can take

effect, the EconoMind Diesel Tuner

needs to learn that your truck

is equipped with an automatic

transmission.

The following driving test shall

be performed in an area where

speeds over 55mph are safe and

traffic is light. For a vehicle with a

manual transmission, follow Step

2. For a vehicle with an automatic

transmission, follow Step 3. While

driving, listen for any exhaust leaks or

rattles, or intake boost leaks. After the

engine cools, re-tighten clamps and

hoses if leaks are detected.

(Manual Transmission) To

teach the EconoMind Diesel Tuner

that your truck is equipped with a

manual transmission, drive the truck

at a speed over 55 mph for at least

2 minutes. The “4,3” diagnostic code

will be eliminated.
Repeat if necessary to eliminate code.

Proceed to Section 10.

(Automatic Transmission) To

teach the EconoMind Diesel Tuner

that your truck is equipped with an

automatic transmission drive the

truck at a speed over 55mph until

the torque converter is locked (the

torque converter is usually locked at

speeds over 55mph). With the torque

converter locked and with turbo boost

below 10psig (ie, light load), maintain

the attained speed steadily for at least

30 seconds. Once the transmission is

learned, the “4,3” diagnostic code will

be eliminated. Repeat if necessary to

eliminate code.

-END, SEcTION 9-

Section 9

TRANSMISSIoN LEARNING