Rough Country RC617 User Manual
Page 9
1. To install the Manual shifter bracket remove the 4 bolt holding the lower shifter boot in place using a 7mm socket.
See Photo 1.
2. Then remove shifter from trans by pulling up and you may have to use a hammer. See Photo 2.
3. Install new shifter extension until it bottom out. Tighten the supplied allen screws using a 3mm allen wrench. See
Photo 3.
4. Install shifter onto shifter extension making sure it is pressed on all the way. See Photo 4.
5. Check shifter operation. Make sure there is complete engagement in all gears and that there is no interference with
floor pan.
6. Reinstall lower shifter boot using 7mm socket.
7. Install console using stock hardware and 10mm socket. Install upper shifter boot and cup holder.
8. Check shifter for interference.
PHOTO 2
PHOTO 3
PHOTO 4
REMOVE THE SHIFTER
INSTALL SHIFTER EXTENSION
REINSTALL THE SHIFTER
PHOTO 1
REMOVE THE MANUAL SHIFTER BOOT
97-02 MANUAL SHIFTER INSTALLATION INSTRUCTIONS
- PERF689 (12 pages)
- 1308 (4 pages)
- 576.20 (16 pages)
- 1010 (4 pages)
- 787.22 (14 pages)
- 282 (14 pages)
- 1098 (1 page)
- 598S (17 pages)
- 379.22 (8 pages)
- 1051 (1 page)
- 392.24 (6 pages)
- 1109 (2 pages)
- 1011 (4 pages)
- 263.22 (9 pages)
- 7599 (4 pages)
- 1169 (2 pages)
- 87496 (4 pages)
- 288.20 (8 pages)
- 324S (20 pages)
- 283N2 (2 pages)
- PERF677 (8 pages)
- 699 (2 pages)
- 1305 (4 pages)
- 774S (10 pages)
- 1403 (2 pages)
- 9219 (2 pages)
- 1186 (1 page)
- 592.20 (8 pages)
- 1113 (2 pages)
- 563.20 (8 pages)
- 1054 (4 pages)
- 479.20 (8 pages)
- 87349 (2 pages)
- 280N2 (12 pages)
- 1021 (4 pages)
- RC0342 (2 pages)
- 3592 (2 pages)
- 1776 (1 page)
- 1182 (1 page)
- 1040 (2 pages)
- 561.20 (4 pages)
- 1117 (4 pages)
- 75113-15 (16 pages)
- PERF662X (8 pages)
- 1156 (2 pages)