Rough Country RC617 - Manual (Page 2)

1. Disconnect negative battery cable using 13mm wrench. See Photo 1.
2. Open glove box and remove strap from glove box door. Put door out of way. remove both 10 amp airbag fuses. See
owners manual. See Photo 2.
3. Remove plastic jeep sway-bar cover using 10mm socket. See Photo 3.
4. If equipped with fog light on the bumper remove push pin from fender and unplug light.
5. Remove air intake hose from air filter housing and throttle body using a screwdriver. See Photo 4.
6. Remove coolant overflow hose and bottle from fan shroud and radiator. See Photo 5.
7. Remove the four nuts from radiator fan then remove the 4 bolts holding fan shroud to the radiator using a 11mm
socket. See Photo 6. Do not drop or let the fan rest again the radiator as this may cause damage to the cooling fins.
INSTALLATION INSTRUCTIONS
PHOTO 1 PHOTO 2
PHOTO 3 PHOTO 4
PHOTO 5 PHOTO 6
REMOVE THE NEGATIVE BATTERY WIRE REMOVE ALL AIRBAG FUSES
REMOVE THE SWAY BAR COVER REMOVE THE AIR INTAKE HOSE
REMOVE THE OVERFLOW CONTAINER REMOVE THE FAN SHROUD