Rough Country RC617 User Manual
Page 11
97-06 3” BODY LIFT 4WD SHIFTER EXTENSION INSTALLATION INSTRUCTIONS
1. When installing a 3” body lift these steps will be performed to ensure the 4wd shifter engages in all ranges of the
transfer case.
2. Remove 4wd shifter rod under vehicle using a screwdriver or pair of pliers. See Photo 1 & 2.
3. Mark a straight 3 inch long line on the thicker part of shifter rod. See Photo 3.
4. Using a grinder make a flat surface beside the line. See Photo 4.
5. Cut the linkage 1 inch from the taper part on rod. See Photo 5.
6. Clean the cut area then install new extension sleeve onto linkage until it bottoms out. See Photo 6.
7. Tighten 1/4” allen screws using 1/8” allen wrench onto the grinded flat area.
8. Reinstall shifter rod back onto vehicle and adjust for proper operation.
PHOTO 1
PHOTO 2
PHOTO 3
PHOTO 4
PHOTO 5
PHOTO 6
REMOVE SHIFT ROD
REMOVE SHIFT ROD
MARK SHIFT ROD
GRIND ROD TO CREATE A FLAT AREA
MEASURE THE ROD
INSTALL EXTENSION COUPLER
- PERF689 (12 pages)
- 1308 (4 pages)
- 576.20 (16 pages)
- 1010 (4 pages)
- 787.22 (14 pages)
- 282 (14 pages)
- 1098 (1 page)
- 598S (17 pages)
- 379.22 (8 pages)
- 1051 (1 page)
- 392.24 (6 pages)
- 1109 (2 pages)
- 1011 (4 pages)
- 263.22 (9 pages)
- 7599 (4 pages)
- 1169 (2 pages)
- 87496 (4 pages)
- 288.20 (8 pages)
- 324S (20 pages)
- 283N2 (2 pages)
- PERF677 (8 pages)
- 699 (2 pages)
- 1305 (4 pages)
- 774S (10 pages)
- 1403 (2 pages)
- 9219 (2 pages)
- 1186 (1 page)
- 592.20 (8 pages)
- 1113 (2 pages)
- 563.20 (8 pages)
- 1054 (4 pages)
- 479.20 (8 pages)
- 87349 (2 pages)
- 280N2 (12 pages)
- 1021 (4 pages)
- RC0342 (2 pages)
- 3592 (2 pages)
- 1776 (1 page)
- 1182 (1 page)
- 1040 (2 pages)
- 561.20 (4 pages)
- 1117 (4 pages)
- 75113-15 (16 pages)
- PERF662X (8 pages)
- 1156 (2 pages)