Rough Country 328S - Manual (Page 10)

39. Install the spacer on strut using stock hardware using 15mm wrench.
See Photo 37.
40. Install strut onto truck using 14mm wrench to tighten upper supplied 3/8 ” nuts and washers See Photo 38.
41. Attach lower control arm to lower part of strut using stock hardware. Tighten lower strut hardware using a 24mm and
21 mm wrench.
See Photo 39.
42. Remove sway-bar link from control arm using 18mm and 8mm wrench.
43. Install the lower link bracket on the lower control arm with the supplied 12mm X 50mm bolt and flange nuts. Install
the new link on the bracket with the supplied 12mm x 65mm bolts and flange nuts. Tighten using a 18mm and 19mm
socket & wrench.
See Photo 40.
44. Install the sway bar link bracket to the bottom side of the sway bar and tighten with the 12mm x 35mm bolts and
flange nut. Tighten using a 18mm and 19mm wrench. Next install the sway bar link to the bracket and tighten using
the 12mm x 65mm bolts and flange nuts.
See Photo 41.
45. Using a 13mm wrench remove bolt from brake line mount and pull brake line out to give clearance for cutting.
See
Photo 42.
PHOTO 37 PHOTO 38
PHOTO 39
PHOTO 42
PHOTO 40
PHOTO 41
INSTALL THE SPACER ON STRUT INSTALL STRUT ON FRAME
ATTACH THE LOWER STRUT INSTALL THE SWAY BAR LINK
INSTALL THE UPPER SWAY BAR LINK REMOVE THE BRAKE LINE MOUNT