Rough Country 1049 User Manual

Page 8

MAINTENANCE INFORMATION

1. Failure to securely tighten all bolts on the winch plate, winch, and fairlead can result in product failure, which may

result in vehicle damage or operator injury. Check that all bolts are securely tightened prior to use.

2. Inspect all nuts and bolts on the winch, winch mount, and related hardware prior to each use. Tighten all nuts that

appear to be loose. Stripped, fractured, or bent bolts or nuts should be replaced.

3. Periodically check bolt for tightness.

THANK YOU FOR CHOOSING ROUGH COUNTRY FOR YOUR OFF ROAD NEEDS.

OPTIONAL ACCESSORIES FOR ZJ WINCH PLATE

CALL YOUR ROUGH COUNTRY DEALER TO ORDER

ROUGH COUNTRY ELECTRIC WINCH

AVAILABLE IN 9500LB & 12000LB

PART # RS120 WINCH

EXTENSION STRAP

WINCH COVER

PART # RS110 SYNTHETIC ROPE

PART # 1048 ZJ D-RING KIT

1. Remove the foam from the bumper. Measure 1/2” up and

mark from raised Location on the passenger side to the
raised location diver side. Cut from outside to outside of
each location. See Photo 1.

OPTIONAL D-RING MOUNT KIT PART # 1048 INSTALLATION INSTRUCTIONS

PHOTO 33