Rough Country 1049 - Manual

JEEP ZJ WINCH MOUNT
Thank you for choosing Rough Country for all your Off Road needs.
Please read instructions before beginning installation. Check the kit hardware against the parts list. Be sure you have all
needed parts and know where they go. Also please review tools needed list and make sure you have needed tools.
PRODUCT USE INFORMATION
Please read instructions before beginning installation. Check the kit hardware against the parts list and product layout.
Be sure you have all needed parts and know where they go. Also please review tools needed list and make sure you
have needed tools.
If questions exist we will be happy to answer any questions concerning the function and correct use of this product.
The installer must verify that the mounting kit does not interfere with the factory air bag sensors, which must not be relo-
cated or modified in any way. The vehicles air bag system may not operate properly if the winch mounting kit is not
mounted in compliance with the vehicle manufacturers recommendations.
Part # 1048-D-ring mount is also available. Please contact your Rough Country dealer to purchase.
Kit Contents:
1049:
Winch
Plate
Dr Side Frame Bracket
Pass Side Frame Bracket
Dr Side Bracket Brace
Pass Side Bracket Brace
1049BAG1-
6-10mm x 35mm Bolts
6-10mm Flat Washers
8-12mm x 35mm Bolts
8-Flat Washers
8-9/16” x 1 1/2” Bolts
8-7/16” x 2 3/4” Bolts
6-Push Pins
92104900
Tools Needed:
Flat screwdriver
Phillips screwdriver
Pliers
Drill Motor
17/32” Drill Bit
Body saw
Tape
Tape Measure
13mm Socket / Wrench
15mm Socket / Wrench
16mm Socket / Wrench
17mm Socket / Wrench
19mm Socket / Wrench
22mm Socket / Wrench