Milton CAT 966H - Manual (Page 24)

24 966H Wheel Loader specifications
Operating Specifications
Waste Bucket High Lift
Bolt-On Change
Bucket Edges in Specs
Rated Bucket Capacity (§) m 3 6.50
yd 3 8.50
Struck Capacity (§) m 3 5.43
yd 3 7.10
Width (§) mm 3355
ft/in 11'0"
Dump Clearance at Full Lift mm 2989 558
and 45º Discharge (§) ft/in 9'10" 1'10"
Reach at Full Lift mm 1185 -16
and 45º Discharge (§) ft/in 3'10" -1.0"
Reach with Lift Arm Horizontal mm 2750
and Bucket Level (§) ft/in 9'0"
Digging Depth (§) mm 134 -5
in 5.28 -0.20
Overall Length mm 8888 328
ft/in 29'2" 1'1"
Overall Height with Bucket mm 6500 549
at Full Raise ft/in 21'4" 1'10"
Loader Clearance Circle with mm 14 871 124
Bucket in Carry Position (§) ft/in 48'9" 5.0"
Static Tipping Load Straight * kg 17 893 177
lb 39,454 390
Static Tipping Load kg 15 860 -3
Full 37º Turn lb 34,971 -7
Breakout Force ** (§) kN 182 -13
lb 40,950 -2,864
Operating Weight * (§) kg 24 237 1746
lb 53,443 3,850
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.
* Static tipping loads and operating weights shown are based on standard machine configuration with 26.5R25 L-4 Firestone tires, roading fenders. powertrain
guard, full fuel tank, coolants, lubricants, air conditioner and operator.
** Measured 102 mm (4.0") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.