Milton CAT 966H - Manual (Page 20)

20 966H Wheel Loader specifications
Operating Specifications
General Purpose Buckets
Teeth and Bolt-On Teeth and Bolt-On
Bucket Teeth Segments Edges Teeth Segments Edges
Rated Bucket Capacity (§) m 3 3.50 3.65 3.65 3.65 3.80 3.80
yd 3 4.50 4.75 4.75 4.75 5.00 5.00
Struck Capacity (§) m 3 2.96 3.10 3.10 3.12 3.27 3.27
yd 3 3.88 4.06 4.06 4.08 4.27 4.27
Width (§) mm 3145 3145 3059 3145 3145 3059
ft/in 10'4" 10'4" 10'0" 10'4" 10'4" 10'0"
Dump Clearance at Full Lift mm 3005 3005 3154 2968 2968 3119
and 45º Discharge (§) ft/in 9'10" 9'10" 10'4" 9'9" 9'9" 10'3"
Reach at Full Lift mm 1389 1389 1247 1411 1411 1270
and 45º Discharge (§) ft/in 4'7" 4'7" 4'1" 4'8" 4'8" 4'2"
Reach with Lift Arm Horizontal mm 2857 2857 2652 2900 2900 2695
and Bucket Level (§) ft/in 9'4" 9'4" 8'8" 9'6" 9'6" 8'10"
Digging Depth (§) mm 78 108 108 78 108 108
in 3.07 4.25 4.25 3.07 4.25 4.25
Overall Length mm 8995 8995 8770 9038 9038 8813
ft/in 29'6" 29'6" 28'9" 29'8" 29'8" 28'11"
Overall Height with Bucket mm 5775 5775 5775 5814 5814 5814
at Full Raise ft/in 18'11" 18'11" 18'11" 19'1" 19'1" 19'1"
Loader Clearance Circle with mm 14 733 14 733 14 528 14 756 14 756 14 550
Bucket in Carry Position (§) ft/in 48'4" 48'4" 47'8" 48'5" 48'5" 47'9"
Static Tipping Load Straight * kg 17 763 17 401 17 585 17 649 17 290 17 475
lb 39,167 38,369 38,775 38,916 38,124 38,532
Static Tipping Load kg 15 824 15 480 15 665 15 717 15 375 15 560
Full 37º Turn lb 34,892 34,133 34,541 34,656 33,902 34,310
Breakout Force ** (§) kN 216 200 202 208 193 195
lb 48,600 45,000 45,450 46,800 43,425 43,875
Operating Weight * (§) kg 23 520 23 672 23 532 23 576 23 728 23 588
lb 51,862 52,197 51,888 51,985 52,320 52,012
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE Standard J732C
governing loader ratings.
*
** Measured 102 mm (4.0") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
1400
yd 3 m 3
kg/m 3
4.75
5.0
5.25
5.5
3.6
3.8
4.0
4.3
1600 1800 2000 2200
Bucket Selection Guide
8.25 6.35
1200 1000
2250 2500 2750 3000 3250 3500 3750 lb/yd 3
Material Density
% = Bucket Fill Factor
115% 100% 95%
2000 1800
Static tipping loads and operating weights shown are based on standard machine configuration with 26.5R25 L-4 Firestone tires, roading fenders. powertrain
guard, full fuel tank, coolants, lubricants, air conditioner and operator.