B&W Trailer Hitches Tow & Stow User Manual
B&W Trailer Hitches For the car

For part numbers: TS10033B, TS10035B, TS10037B, TS10038B, TS10040B, TS10047B, TS10048B, TS10049B
B&W Tow & Stow 09-14-2005
Make sure pin is
locked in receiver
on vehicle.
If hitch is in the stor-
age position, use
hand to support hitch,
pull pins and rotate.
Raise or lower
hitch to the desired
height and insert
pins in holes.
Lock pins with cotter
pins.
Pull the pin that
unlocks the double
ball, rotate to the
desired size ball,
insert pin in hole.
Lock pins with
cotter pins.
To stow, use hand to
support hitch, rotate ball
to storage position, then
pull pin on hitch and
rotate underneath.
Before towing, make
sure pins and balls are
tight and locked with
cotter pins.
1
2
3
4
5
6
7
8
Caution! Like any tool, the TOW & STOW ball mount requires respect. Always use standard towing procedures
and follow safety checklist (ball tight, safety chains, etc.).
Never hook up safety chains to ball mount. Never
overload your towing system. Always use caution when handling the
TOW & STOW ball mount. To avoid
pinching fingers,
never remove from receiver or carry this hitch without the locking pins in place.
TM
TM
B&W Trailer Hitches
1216 Hwy 224
Humboldt, KS 66748
800.248.6564
www.turnoverball.com