Atdec Telehook TH-TVCD Installation manual - Manual (Page 2)

Step 3. Mount Column to Base
Step 6. Mount Screen Support
6.1 Slide screen support
into cross bar ensuring
holes face the centre.
6.2 Fasten screen support
to the cross beam and
repeat for the other side.
Step 4. Adjust Height Step 5. Mount Cross Beam
3.2 Line holes up
and secure column
to base.
3.3 Secure column
from beneath.
3.1 Ensure column
holes face the rear
of the base.
M8 Button Screw 3/8” Spring Washer
3/8” Washer
93mm OD Washer
3/8” Bolt
Spanner
21mm OD M8
Flat Washer
Holes
5.1 Mount cross beam
onto column and fasten
with screws.
4.1 You can adjust the
height by moving the
tubes up or down before
fastening them.
M8 Button Screw
Allen Key
Note: Notch facing upwards
M8 Button Screw
Allen Key
M8 Curved Washer
Tab facing upwards
Max Extension: 1310mm
Holes
21mm OD M8
Flat Washer
C
L
M8 Button Screw
C
L