Atdec Telehook TH-TVCD Installation manual - Manual

Installation Instructions TH-TVCD
Component Checklist
Mobile TV Cart - Dual
Cross Beam
Column
Shelf Mounting Plate
Base
Castors (x2)
Locking Castors (x2)
Shelf
Shelf Mounting
Bolt (M10)
Castor Spanner
Mounting
Brackets (x4)
Screen
Support (R)
Screen
Support (L)
Column Top Column Bottom Mounting Bracket
M4 x 16/25
(x16)
M5 Washers
(x16)
1/4” Washers
(x12)
M5 x 16/25
(x16) M6 x 20/40/55
(x12) M8 x 20/40/55
(x12)
Cable Plug
93mm OD
Washer (x2) Extension Bracket (x8)
Rectangular Washer
(x8)
19mm OD M8 Flat
Washer (x16)
M8 Phillips Head
Screw (x16)
3/8” Washer (x2)
3/8” Spring
Washer (x2)
3/8” Bolt (x2)
M8 Button Screw
(x10)
21mm OD M8
Flat Washer (x10)
Allen Key
Spacers (x24)
HARDWARE
! IMPORTANT - Install Telehook TV Cart as per installation instruction.
! This product supports a maximum load of 50kg (110lbs.)/Monitor.
! This product supports VESA Mounting Hole Configurations: From 200mm to 900mm wide
and from 200mm to 400mm high (600mm high with extensions).
! The manufacturer accepts no responsibility for incorrect installation.
IMPORTANT INFORMATION:
Step 1. Check Components
Check you have received against the component checklist and hardware above.
Step 2. Assemble Base
2.1 Mount Locking castors to the front, Free
castors to the back and tighten with spanner.
Locking castors
Free castors
Castor Spanner
Tools Required:
• Phillips Head Screwdriver